How to build a wall?
It may seem that the wall of the wall is veryeasily. But the margin of strength of concrete is such that it does not allow to do it quickly. Have to try hard. In addition, in the high-rise buildings the partitions are made using monolithic technology, so the reinforcement can be in the most unexpected places. On how to properly wall the wall, and talk later in our article.
How to Shield the Wall: Tools
This should not be a puncher with a bounce modehammer, namely the bump. The fact is that such a tool will not overheat, and the power in a conventional perforator is not enough to wall the walls.
Nozzle-peak (2 pieces)
Choosing a peak, it is better to buy it. After all, the smaller the area of its surface, the easier it will be to destroy concrete. Two pieces are needed so that when one of the peaks is stuck, you can remove it and put another, thereby releasing the first of the concrete (and this happens very often). It is better to take "Makita" - a good steel and serves for a long time. Take one short, the other is more authentic. Believe me, it will come in handy.
It is needed in order to expand the doorwayor dismantle the plumbing, for example. It will also come in handy in order to cut off the reinforcement. To do this, stock up the metal discs (5-6 will be enough) and discs on the stone (2-3 depending on the amount of work). In addition, the Bulgarian will be able to sharpen the peak, which is pretty dull from the large amount of work.
The dust will be such that it does not seem too small. Do not neglect health and buy a respirator, preferably a professional. It costs about two hundred rubles, but it will last long and will well hold dust. Take care of your feet! You can take construction sandals - a steel plate and the noses of such shoes perfectly protect against falling debris. In addition, work better in gloves - they protect you from calluses, and the tool is more convenient to hold.
How to bend the wall to the wiring
Among other things, you will need a drill. It looks like a drill, but only with a shock tip. Be guided by a diameter of 12 mm.
First, mark the place for the wiring, thendrill a hole as much as possible - concrete will be more convenient to beat. For chipping, do not mark large pieces, the peak should be beaten almost from the edge, so the work will go much faster. Pick up the peak, - the productivity of the impact of the bump will increase, do not forget to undermine the peak.
The most dangerous is the Bulgarian. The disk should be dispersed to a maximum and only then slowly enter into the concrete. If you did it at once and abruptly or did not give a spin, you can see the contents of your own abdominal cavity. Stand as far as possible from the wall and the Bulgarian so that you can jump in the event of an unforeseen situation. The legs should be as far as possible, and the hands with the tool are extended towards the wall. And when working with a bump at a height, you should choose goats (accent on "o") as wide as possible and do not lean the bump against the wall directly, otherwise the impact can push you away from the wall and you will fall. Take care of your feet! Work with a Bulgarian - only with glasses!